Purging Compound for Blow Molding

How to Go Green Using the Purging Compound for Blow Molding

If as a company you desire to go green you need to be socially as well as financially responsible. The best way for one dealing with blow molding to go green is to reduce waste. The two primary forms of waste are scrap resins and wasted energy. However, if you use a Purging Compound for Blow Molding made by us at UNICLEANPLUS, you can reduce both scrap resin and wasted energy.


It can be financially and environmentally expensive when you purge blow molding machinery. If you use resins to purge you will require to use a large amount of energy as it takes a maximum period to clean the machine. Moreover, if you use resin to clean a machine there will be a large amount of scrap as there will be a need to use a large quantity of resin to clean it. So, if you desire to reduce waste it is wise to use the purging compound that we manufacture. You may be thinking that purging compound costs more than resins; however, if you add the waste, you will notice that using our purging compound is more affordable. Using our purging compound you can reduce waste, utilize less energy, and lose less production time. If you add all these factors, you can understand how efficient it can be monetarily and environmentally.

Recycle the Purging Compound

You need to understand that all purging compounds are not made equal. If you use a conventional purging compound you can reduce waste; however, you cannot reuse it. If on the other hand, you are using recyclable purging compound you can use the scrap to make other parts or sell that to plastic processor scrap dealers. On the other hand, if the purging compound is not recyclable you need to throw away the scrap and those might end up in a landfill and will not be environmentally friendly. Moreover, throwing away the scrap is also not profitable as selling those to plastic processor scrap dealers will not be an ideal way to recover the cash spent to buy the purging compound. If you desire to have a recyclable Purging Compound for Blow Molding you can talk with us.

Areas Where to Use Purging Compound

There are three areas in the blow molding process where you can reduce scrap and energy using our purging compound. The largest factor leading to waste is when there is a change in colour from dark to light. If you use an efficient purging compound in place of resin, you will be requiring less amount of compound to have the desired cleaning.

There can be a waste when there is a material change. If the previous resin stays in the machine it can lead to contamination. Using our purging compound, you can remove a wide spectrum of resins.

If carbon becomes a source of contamination there needs to be use of purging compounds. It is better to follow a preventive maintenance schedule so that the carbon build-up is not excessive when you need to pull the screw out to clean manually.

So, if you desire to have the best quality Purging Compound for Blow Molding do call us and we will support you with the best suitable grades for your application.

Are you ready to start improving your efficiency & increasing your profitability?

Contact Us

Free Sample

Request a free sample of UNICLEANPLUS™ Purging Compounds for your machine and start saving today.

Request Your Free Trial Sample

Cost Analysis Calculator

Use our free calculator to see how much you could be saving with UNICLEANPLUS™ Purging Compounds.

Download Cost Analysis